DISCLAIMER FOR CERAMIC TILES AND SANITARY WARE:
J R EXIM reserves the right to delete & amend either totally or partially, any of the colors, shapes, sizes, references and other technical specifications contained in this catalogue at anytime without prior notice, the colors of tiles shown in this catalogue are purely illustrative and limited to printing process, please refer actual sample before final selection, the details of sizes, colors,references should be vitrified, for typographical errors.
NOTE: (1) Certain amount of size and shade variation is inherent in all ceramic products (2) Our conformity to Below standards is applicable only for premium quality. (3) Colors shown are as accurate as the limitations of the printing process will allow. (4) Prospective customers are advised to inspect a sample of the tile before ordering. (5) Every effort has been made to ensure the accuracy of the information given. (6) Sometimes variations in shade or size being inherent to ceramic industry may occur. it is suggested to check the tiles before purchase and lying as company does not accept responsibility once the tiles are laid.
TECHNICAL SPECIFICATIONS For 300x450, 300x600 MM Digital Wall Tiles and Poster Series Wall Tiles
| Sr. | Characteristics | Euro standards EN-159/159B |||/IS 13753 Group B | Our Values |
| A | Dimension & Surface Quality | ||
| 1 | Deviation In Length & Width | +/- 0.5 % | ± 0.3 % |
| 2 | Deviation in Thickness | +/- 0.5 % | ± 0.5 % |
| 3 | Straightness of Sides | +/- 0.5 % | ± 0.3 % |
| 4 | Rectangularity | +/- 0.6 % | ± 0.5 % |
| 5 | Surface Flatness | +/- 0.5 % | ± 0.3 % |
| Center Curvature | +/- 0.5 % | ± 0.3 % | |
| Edge Curvature | +/- 0.5 % | ± 0.3 % | |
| Warp Edge | +/- 0.5 % | ± 0.3 % | |
| 6 | Surface Quality | Min 95% of Tiles should be free from visible defects. | Min 95% of Tiles |
| B | Physical Properties | ||
| 1 | Water Absorption | 20% > E > 10 % | 14 to 18 % |
| 2 | Modulus of Rapture | > 150 kg/cm² | >180 kg/cm² Avg. |
| 3 | Scratch Hardness | Min 3 Moh's | >3 Moh's |
| 4 | Crazing Resistance | 1 Cycle Pass | 4 Cycle Pass |
| C | Chemical Properties | ||
| 1 | Stain Resistance | Min Class 2 | Resistance to All Acids and Alkalies & Household Chemicals, Except Hydro Flourish Acid. |
| 2 | Household Chemicals | Min Class B | Resistance |
| Scratch Resistance | Min 3 | Min 3 | |
| D | Thermal Properties | ||
| 1 | Thermal Shock Resistance | 10 Cycles | Resistance |
| 2 | Thermal Expansion | 9x10^(-6) - K^(-1) max | Conforms |
TECHNICAL SPECIFICATIONS For 600x600, 800x800 & 800x1200 MM Vitrified Floor Tiles:
| Sr. | Property | International Std.ISO 13006 / EN 176 Group Bla | Our Values | Method Of Testing |
| 1 | Deviation In Length & Width | +/- 0.6% | +/- 0.1% | EN 98 / ISO 10545-2 |
| 2 | Deviation in Thickness | +/- 5% | +/- 2-5% | EN 98 / ISO 10545-2 |
| 3 | Straightness of Sides | +/- 0.5% | +/- 0.3% | EN 98 / ISO 10545-2 |
| 4 | Rectangularity | +/- 0.6% | +/- 0.3% | EN 98 / ISO 10545-2 |
| 5 | Surface Flatness | +/- 0.5% | +/- 0.1-0.2% | EN 98 / ISO 10545-2 |
| 6 | Flexural Straightness | > 27 N/MM² | > 47-48 N/mm² | EN 100 / ISO 10545-4 |
| 7 | Breaking Strength | 1113 N | 2800-2880 N | ASTM C-648 / ISO 10545-4 |
| 8 | Water Absorption | < 0.5 % | < 0.04-0.05 % | EN 99 / ISO 10545-3 |
| 9 | Density (g/cc) | > 2 | 2.4 | DIN 51082 |
| 10 | Mohs Hardness | > 7.5-8 | > 8 | EN 101 |
| 11 | Abrasion Resistance | < 204 MM² | < 143-145 mm² | EN 102 / ISO 10545-6 |
| 12 | Stain Resistance* | Resistant | Resistant | ISO 10545-14 |
| 13 | Chemical Resistance | No Damage | No Damage | EN 106 / ISO 10545-13 |
| 14 | Colour Resistance | No Damage | No Damage | DIN 51094 |
| 15 | Thermal Expansion | < 9 x 10^(-6) | < 6 x 10^(-6) | EN 103 / ISO 10545-8 |
| 16 | Moisture Expansion | Nil | Nil | ISO 10545-10 |
| 17 | Thermal Shock Resistance | No Damage | No Damage | EN 104 / ISO 10545-9 |
| 18 | Glossiness | - | Min 65-92% Reflection | Glossmeter / ISO 10545-2 |
| 19 | Skid Resistance (Coefficient Friction) | > 0.4 | > 0.6 | ASTM C-1028 / ISO 10545-17 |
| 20 | Frost Resistance | Frost Proof | Frost Proof | EN 202 / ISO 10545-12 |